BRANDO 2nd Generation Lighting Strip with High Power and Wide Beam Angle
Our plug and play system
Conventional lighting requires separate power and a wired connection to every lamp, needing the expertise of electricians. This becomes labour-intensive and costly when running many meters of lighting. The BRANDO LED Strip Lighting plugs into an existing power source using a power supply which then connects to one end of the LED strip.
Maintenance-free. Easy to repair.
Damage to lighting through routine underground activities happens. When a conventional lamp is damaged, it results in loss of illumination over many meters – making the affected area a safety hazard until repaired by a qualified electrician. Should a section of the BRANDO strip light be damaged, only this section loses light. The remaining portion of the strip continues to provide illumination – allowing for a safer environment. Additionally, damaged sections can be replaced in 8" strips – making it a quick and cost-effective fix.
• Intelligent temperature management, sensors monitor LED temperature and if safe parameters are exceeded the affected LED’s are automatically dimmed until safe temperatures are restored.
• Intelligent voltage surge management, restorable resistors limit overcurrent and overvoltage situations.
• AC to DC convertors, miniature voltage convertors.
• Short circuit protection, in the case of short circuit the power is isolated until the circuit is normalized.
Dimension: 10000mm(length) *36mm(width) *12mm(height)
Part Number | BO-SL280-220V(C) |
LED Chip | Epistar |
LED configuration | 280 LED's spaced evenly over a metre length |
Range fed | 100 metres |
Recommended fixing height | 5 - 6 Metres |
IP Rating | 68 |
Power Consumption per LED | 0.125 Watts |
Power Consumption per Metre | 35 Watts |
Colour Rendering Index CRI | > 80 |
Colour temperature | 6500 Kelvin |
Flux (lm) | 3100lm / M - 3200lm/M |
Voltage on lighting VAC | 220-230 VAC |
Light maintenance | 15%-20% Drop over 4 years |
Lifespan | 5 Years |
Warranty Lighting | 1 Years |
Outer covering | Food grade silicone |
Dimensions | 10000mm(length) *36mm(width) *12mm(height) |
Tensile strength | +-50KG |
Operating temperature | -40℃ to 80℃ |
Protection | Short Circuit Over Voltage Over temperature Over Current |
None