Led Mining Lamp In Low temperature
We did a low temperature test on this kind of mine lamp, made it work at low temperature, and recorded the data, this is our test report:
low temperature test | ||||
sample status/ amount | 3 samples in working condition | |||
experimental objective | 1.Turn on the light when fully charged; 2.Put the product into the high and low temperature box, the product spacing is greater than or equal to 10 cm, adjust the temperature controller to -40℃; 3.After 16 hours, leave at room temperature for 1 ~ 2 hours, then check appearance, structure and function; 4.The test time is calculated when the test chamber reaches the required temperature conditions | |||
test method | Product appearance, structure and function are normal 1.Function check: main lamp, secondary lamp, three-color lamp, charge liquid crystal display to the leader whether the function is normal; 2.Structural inspection: whether the shell material deformation, whether the cable loose; 3.Appearance inspection: no cracks on the surface of the shell and other phenomena inconsistent with the state before testing; | |||
judgment basis | appearance | function | structure | remark |
testing time (hour) | ok | ok | ok | |
4 | ok | ok | ok | |
6 | ok | ok | ok | |
8 | ok | ok | ok | |
12 | ok | ok | ok |